Basic HTML Version
M rke
ar
a
r Bo d
(Wh t )
i e
Sectional view of Writing/Marker board
Ch l
ard
a k Bo
re n
(G e )
Anodized aluminiumprofile bonded with adhesive
Galvanized steel sheet backing 0.35mm thick or
aluminium foil.
Writing surface of magnetic effect porcelain
enameled steel sheet white for Marker, Green for
chalk use.
Pre-treated 9mm thick wooden board
Backing, Wooden core and porcelain enameled
steel are bonded with special quality adhesive.
ﻢﻣ۹ ﺐﺸﺧ ﺡﻮﻟ
.ﻩدﻮﺠﻟا ﻲﻟﺎﻋءاﺮﻐﺑ ﺔﻘﺼﻠﻣ ﺔﺑﺎﺘﻜﻟا ﺢﻄﺳﻭ ﺐﺸﺨﻟاﻭ ﺮﻬﻈﻟا
مﻼﻗﺃ-ﺾﻴﺑﺃ ﻭﺃﺮﻴﺷﺎﺒﻃ - ﺮﻀﺧﺃ نﻮﻟ
ﺔﻳدﻮﻧﻷا ﺔﻘﻳﺮﻄﻟﺎﺑ ﺞﻟﺎﻌﻤﻟا مﻮﻴﻨﻴﻤﻟﻷا ﻦﻣﺭﺎﻃإ
مﻮﻴﻨﻴﻣﻮﻟﻷا ﻖﺋﺎﻗﺭﻭا ﻢﻣ٠٬٣٥ﻦﻔﻠﺠﻤﻟا ﺪﻳﺪﺤﻟا ﻦﻣﺮﻬﻈﻟا
نﻼﺳﺭﻮﺒﻟﺎﺑ ﻰﻠﻄﻣ ﺝﺎﺼﻟا ﻦﻣ ﺔﻴﺴﻴﻃﺎﻨﻐﻣ ﺔﻴﺻﺎﺨﺑ ﺔﺑﺎﺘﻜﻟا ﺢﻄﺳ
PORCELAIN BOARDS
Daily Care andMaintenance
Same procedure is used to clean both chalk andmarker boards:
Removing Crayon and Tape:
The same procedure is used to remove both crayon and tape.
Removing Permanent Marker
* For the initial cleaning, wipe your board with a clean cloth moistened by a liquid cleanser.
* Rinse with clear water. This step is simple but very important.
* Wipe dry with a clean cloth.
* If your board is used daily, the cleaning should be performed at least 2 to 3 times a week . More trough
cleaningmay be required if writing is left on the board for more than 2 days.
* Dampen a clean, dry cloth with water.
* Apply a small amount of non-abrasive cleanser, such as Soft Scrub without bleach, onto the cloth. Use less for
chalk board surfaces. For best results follow non-abrasive cleaner manufacturers found on the product label..
* Begin cleaning a small, manageable area using a back and forth horizontal motion. use gentle pressure as if
you were cleaning a window.
* Wipe off all residues with a dry cloth.
* Rinse well with clear water. Please note that the rinsing and drying steps are very important.
* Wipe with a clean cloth.
* Follow the same procedure for the reminder of the board.
*Aquick and easy way to remove permanent marker from the board’s surface is to write over the top of the
permanent marker writing with a dry-erasemarker and simply erase!
* Moisten a clean, dry cloth with isopropyl alcohol. Use less alcohol for chalk boards.
* Wipe the board in a circular motion to loosenmarker residue.
* Rinse with clear water.
* Dry the board with a clean cloth.
* Repeat these steps as often as necessary to remove all residues.
1
ﺔـﻴﻨﻔﻟﺍ ﺕﺎـﻨﺎﻴﺒﻟﺍﻭ
RIYADH FURNITURE INDUSTRIES
ﺙﺎـﺜﻸﻟ ﺽﺎـﻴﺭﻟﺍ ﻊـﻨﺼﻤ
ﺙﺎﺛﺃ
General Specification for Chalkboard
Construction / Technical data
ﺓﺭﻭـﺒﺴﻠﻟ ﺔـﻤﺎﻌﻟﺍ ﺕﺎـﻔﺼﺍﻭـﻤﻟﺍ